yorkstone Archives - North West Yorkshire Tile Doctor

Botched Yorkstone Tiled Floor Instalation Resolved in Guiseley

In an interesting turn of events, I was recently contacted again by a homeowner from Guiseley, near Leeds, with whom I had been in touch with two years prior. At that time, I had quoted for cleaning and maintenance work to be carried out on a Yorkshire Stone, or ‘Yorkstone’ tiled floor, but the customer had opted to go with a different company. Yorkstone is a variety of Sandstone that it unique to the quarries of Yorkshire.

When the customer called me again, she explained that the previous work – most likely carried out by inexperienced cowboy builders – had been disastrous. The stone evidently had not bene properly cleaned and very little sealer had been used to protect it against wear and tear. The result was a very dirty and dusty floor – and the only solution was to start the restoration process over again, this time with the help of a true professional!

Here’s a photo of what the floor looked like before the restoration:

Yorkshire Stone Floor Guiseley Leeds Before Cleaning

Cleaning Dull and Dirty Yorkstone Tiles

Since the floor had not been cleaned properly to begin with, there were several unsightly paint stains on the stone in addition to general dirt and stains. To remove these, I applied Tile Doctor Pro Clean, which is a reliable alkaline cleaner, liberally across the floor and left it dwell for a short period. I then used a wire brush to scrub away the muck.

The customer had asked the builder to grout the tiles to reduce the likelihood of trapped dirt and make the floor feel complete. For whatever reason, builder either wouldn’t or couldn’t oblige, so I grouted the whole floor as well, much to the customer’s delight.

Sealing Yorkstone Tiles

Once the floor was fresh and clean, it was left to dry completely so it could subsequently be sealed.

My choice of sealer was Tile Doctor Seal and Go, a topical sealer which provides both a stain resistant surface seal and a durable and aesthetically-pleasing low-sheen finish to really enhance the character of the stone. Four coats of sealer were used in total to ensure maximum protection.

Here’s what the floor looked like after the restoration:

Yorkshire Stone Floor Guiseley Leeds After Cleaning

After cowboy builders had botched the job, the customer was exceptionally happy that the situation had finally been put right. The floor is now in top shape and will be protected against wear and tear for a long time to come.

Professional Restoration of a Dirty Yorkstone Tiled Floor in North Yorkshire

Old Yorkstone Tiled Floor Transformed at the Salts Mill

1 Comment / Flagstone Tile Cleaning, Leeds Tile Cleaning, Work History / Nigel Stoker

For this job, I had the pleasure of visiting the historic Salts Mill, a former textile mill turned art gallery, shopping centre, and restaurant complex near Bingley, West Yorkshire. It was built in 1853 by the famous manufacturer and philanthropist, Sir Titus Salt, and was at one point the largest industrial building in the world by total floor area.

Salts Mill Yorkshire Stone Before Cleaning

As you can imagine, a lot of the rooms at Salts Mill are over a century and a half old. Most of them also contained stone flooring made from Yorkstone – a type of Sandstone unique to Yorkshire, and easily distinguishable due to its rich, natural yellow colouring. Unfortunately, one such floor in the Salts Mill was in quite a bad state. It has completely lost its vibrance – appearing more grey than yellow – and was evidentially in need of a very deep clean and fresh seal.

Cleaning an Old Yorkstone Floor

I started the Yorkstone tile restoration by soaking the floor in a strong dilution of our reliable alkaline-based tile cleaner, Tile Doctor Pro Clean, and scrubbing it in using a rotary machine fitted with a scrubbing pad. This quickly removed the initial layers of muck and, in the process, revealed oil-based paint and glue stains all over the floor.

Salts Mill Yorkshire Stone During Cleaning

To break down the oil and paint I applied Tile Doctor Remove & Go, which is our heavy duty stripper, remover and degreaser. This quickly ate through the paint and glue, and I followed by giving the floor another thorough clean with Pro Clean. Finally, I rinsed the floor with clean water before leaving it to dry for a full two days due to the amount of chemical cleaning product and water applied.

Sealing an Old Yorkstone Floor

Upon my return to the Salts Mill two days later, I ran some quick damp tests to check for any excess moisture which could’ve prevented me from sealing the floor. Thankfully, the floor was dry and ready to be sealed, but it is always recommended, especially with older floors, to be aware of damp issues as these can be very troublesome.

Salts Mill Yorkshire Stone After Cleaning

My choice of sealer was Tile Doctor Seal and Go, a topical sealer which provides a robust, stain resistant seal and a durable low sheen finish all in one product. Multiple coats of Seal and Go were applied, bringing the life and character back to these classic tiles.

Professional Restoration of an Old and Dirty Yorkstone in Yorkshire

Old Yorkstone Tiled Floor Transformed at the Salts Mill Read More »