Encaustic Tiled Victorian Hallway Floor Restored in York
Detailed below is the renovation of an original encaustic tiled floor at a Victorian tiled property in York which was 160 years old. The floor had been cleaned regularly but unfortunately using the wrong cleaning products which were too strong and had prematurely stripped off the sealer. This had left the tiles vulnerable to ingrained dirt and were now proving difficult to keep clean.
I went over to survey the floor and create a quote for its renovation and discovered areas where the tiles were loose and missing. One area in particular was quite bad and would need more attention to the foundation to make the floor completely level and easier to maintain.
 |
 |
From the survey I was able to create a plan for the restoration and work out a detailed quote that included replacement tiles and products. The quote was accepted and a date agreed for the work to start.
Cleaning an Encaustic Victorian Tiled Hallway
Before cleaning the floor, it was necessary to address all the problems with loose and damaged areas. So, work started with the removal of cracked and broken tiles. This needed to be done carefully so as not to lose any neighbouring tiles and therefore making the job larger than necessary. To solve the badly damaged area I had to remove the tiles and take away the lime mortar foundation underneath. This area then had to be re-levelled and made good before re-tiling with replacement reproduction tiles, I had sourced earlier.
Once the repairs had set properly, I returned to clean the whole floor using a rotary floor machine fitted with a black pad to scrub in a strong dilution of Tile Doctor Pro-Clean. This is an effective tile cleaner that lifts the dirt out of the tiles and removes what was left of the original sealer. This floor was then rinsed with water and the soiled solution extracted with a wet vacuum.
Next step was to give the floor and acid wash using Tile Doctor Grout Clean-Up which neutralises the floor after the use of Tile Doctor Pro-Clean which is alkaline. It also dissolves any salts which may be present in the floor and could appear as white efflorescence as the floor dries.
 |
 |
Next, I addressed some slight lippage issues that were inherent in the floor. To do this a very coarse 50-Grit milling pad was run over the raised areas to reduce them. I used a heavy polishing machine for this which has an automatic water feed for lubrication. After cleaning away the soiling that was generated, the process was repeated with a 200-grit milling pad to improve the appearance of the tiles.
Sealing an Encaustic Victorian Tiled Hallway
The floor was left to dry overnight and then on my next visit sealed with a couple of coats of Tile Doctor Colour Grow which is a fully breathable colour enhancing impregnator. It’s worth mentioning that using a breathable sealer is very important when choosing a sealer for old floors that don’t have a damp proof membrane.
 |
 |
Once done, the repaired and restored floor looked much cleaner and made the whole hallway look more inviting. My client was happy with our work and left the following 5-star feedback:
For aftercare I had arranged for the client to receive a bottle of Tile Doctor Stone Soap which is an appropriate cleaning product for the regular cleaning of sealed floors.
Professional Restoration of an Encaustic Victorian Tiled Hallway in North Yorkshire
Encaustic Tiled Victorian Hallway Floor Restored in York Read More »
