These pictures show very fine textured porcelain tiles that had been installed in a shower cubicle at a property in Leeds that did not have the grout cleaned off properly. It’s worth knowing that we cover the whole city of Leeds which has one of the most diverse economies in the UK and is known as its second biggest legal and financial centre after London.
On arrival it was clear where the problem lay. Unfortunately, the tiler who had installed the tiles had not been very diligent in removing the excess grout afterwards leaving it to dry on the surface where it had become stuck in the surface of the textured tile. This is a problem commonly referred to as Grout Haze, the tiles are literally smeared in grout and once it has set no amount of household cleaner will remove the residue.
To add to the problem the situation with the grout haze had not been resolved after installation in-fact it had been fitted a few years prior and a build-up of soap scum and stains from the dyes in shampoo products had made the shower cubicle look worse.
Tile Doctors have a solution for every problem and I knew exactly how to remove the grout smearing and revamp the whole shower cubicle. Confident I could get them cleaned up in less than a day we agreed a price and booked the work in to be done.
Cleaning Porcelain Tiled Shower Cubicle
Before tackling the Grout Haze, I needed to clean the tile and grout, so I started with an application of Tile Doctor Oxy-Gel which being a gel sticks well to vertical surfaces such as wall tiles allowing it dwell longer and really breakdown the dirt. I worked on one square metre at a time leaving it to dwell for ten minutes and then scrubbed in with a scouring pad. The area is quite small, so it was easiest to do the work by hand rather than using the rotary hand buffer. The area was then rinsed thoroughly to remove the soil and any remaining product.
Next while the tile was still wet l applied Tile Doctor Grout Clean-up to tackle the grout smears. Grout Clean-up is an acid, so you do need to be careful however it is the only thing that will remove grout once it’s dried, also I wouldn’t recommend using it on natural stone as it can etch the surface however these tiles were Porcelain. The process worked well although some tiles needed to be re-treated to get rid of all the smears.
I rinsed again with water and then dried with a heat gun to make sure no marks or stains came back when completely dry. Happy that the tiles and grout were now as clean as possible, and the area was fully dried out, all that remained was to strip out the old stained silicone sealer and replace with new.
Silicone Sealing a Porcelain Tiled Shower Cubicle
We do have a product called Duo-Clean that can clean up silicone but my preference in this case was to strip out the old with a sharp knife and replace with new. I find this really adds to the renovation of the cubicle completing the transformation. It also ensures the cubicle is left waterproof and less likely to have a leak develop in the old silicone in future.
It is amazing the difference the clean-up made. The client now has the shower cubicle they had hoped for and are happy to use every day, they were very pleased with the results.
As an alternative to Grout Clean-up take a look at Tile Doctor Acid Gel which being in Gel form sticks longer to wall tiles allowing the product to dwell longer resulting in a more effective clean.