Travertine Wet Room with Leakage Problem Restored in Harrogate

Travertine is a distinct and highly aesthetic material which offers unique characteristics and colouring that not many other types of stone can offer. It looks great when used on tiled floors and in this case shower cubicles however like any natural stone it does need maintenance.

A good example of this point was this Travertine wet room in Harrogate, which comprised of large format Travertine tiles on the floor and Travertine mosaic tiles on the walls. It was in poor condition and to make things worse had been leaking for years. A local plumber had tried to resolve the leak, but to no avail. At this point, the property owner was desperately searching for a solution, and decided to contact me to see what could be done both to restore the appearance of the wet room and fix the leakage.

Cleaning a Travertine Tiled Wet Room

On first inspection of the wet room, l couldn’t see any obvious problems that might be causing the leak, however the white silicon did look a bit questionable and had already decided that would need replacing. To start I turned my attention to cleaning the whole shower cubicle, including the tile and grout.

I did this by applying Tile Doctor Pro-Clean, which is a high alkaline cleaner, to remove the mould, soap scum and dyes caused by daily exposure to acidic soap and shampoos. These issues can build up exceptionally quickly if care is not taken to regularly rinse down the shower after each use.

During this process, I noticed grout haze had been left on the surface of the tiles following installation and so treated the problem with Tile Doctor Acid Gel, which is a blend of hydrochloric and phosphoric acid in gel form. Being a gel, this product works particularly well on vertical surfaces because it is easier to control.

The next step was to resolve the leakage problem, starting by removing all the old and unattractive white silicon. When l removed the silicon, I could see that it was black with mould at the back. It was clear to me then that water was getting behind it and this was the cause of the leak. Also, this revealed a 2-3mm gap between the wall and the base of the shower. The gap was damp and mould had collected there, so this needed to be scraped out manually and the gap dried with a heat gun. Finally, l filled the gap with grout to seal it and left the wet room to dry overnight.

Sealing a Travertine Tiled Wet Room

The next day, I returned to the property and sealed the grout with Tile Doctor Ultra-Seal. This is a premium, natural-look, penetrating sealer formulated to provide maximum stain protection and allow moisture vapour transmission. To finish the restoration, I applied fresh, clear silicon around the base.

In my opinion, white silicon should never have been used with stone, as clear silicon is far more suitable and more pleasing to the eye. Certainly, my customer agreed – and she was very pleased with the result and no more leak.

 

Professional Restoration of a Travertine Tiled Wet Room in North Yorkshire