yorkshire flagstone

Old Yorkshire Flagstones Before and After Cleaning Haworth

Old Yorkshire Flagstones Revitalised in Haworth Village

This Yorkshire flagstone floor was about 20m2 in size and was well overdue a deep clean, additionally a lot of the pointing was loose or missing which would need to be resolved. The location of this job was at a house in Haworth village which is situated at the edge of the Pennine moors in West Yorkshire, the area is known as Bronte country after the famous Bronte sisters who lived here in the local parsonage in the 19th century.

Old Yorkshire Flagstones Before Cleaning Haworth

Cleaning Yorkshire Stone

To deep clean the floor the sandstone flagstones were covered in a 1:3 dilution of Tile Doctor Pro-Clean which was left to dwell and soak into the stone for 15 minutes before being scrubbed clean using a rotary machine fitted with a black pad. The now dirty cleaning solution was then removed using a wet vacuum and then the whole floor washed down with water and stubborn areas re-treated until I was satisfied.

The next step was to rake out the loose pointing and re-point with a matching grey flexible wide joint grout. This is the advantage of using a Tile Doctor to work on your tiled floors as were not just a cleaning company.

Sealing Yorkshire Stone

The floor was left to dry overnight and I returned the next day to seal the floor first checking it for dampness using a Damp Meter. The flagstones were dry so I then proceeded to seal the floor using four coats of Tile Doctor Seal and Go which adds a nice subtle sheen to natural stone, it also a water based sealer so there’s no smell.

Old Yorkshire Flagstones After Cleaning Haworth
You can see from the photo that as well as protecting the floor the sealer adds to the appearance of the tiles and brings out the natural colours that were not visible earlier.

Deep Cleaning Yorkshire Flagstone in Yorkshire

Old Yorkshire Flagstones Revitalised in Haworth Village Read More »

Yorkshire Stone Hebden Bridge After Cleaning

Yorkshire Flagstones Cleaned and Sealed in Hebden Bridge

The photographs below are of an 18m2 Yorkshire Stone floor in the kitchen of a barn conversion in the village of Hebden Bridge. The flagstones which appeared to be various shades of dark grey had lost any colour and vitality they once had, in fact they only seemed to come alive when wet and once dry the natural features and colours of the Yorkshire stone faded away. This was caused by the sealer being worn away allowing dirt to become ingrained in the stone making it difficult to properly clean.

Yorkshire Stone Hebden Bridge During Cleaning

Cleaning Yorkshire Stone

To restore the natural appearance the floor was soaked in a 1:2 dilution of Tile Doctor Pro-Clean and then scrubbed clean using a rotary machine fitted with a black pad. Pro-Clean is an industrial strength alkaline cleaning product that is safe to use on Tile, Stone and Grout; for best results you should let the Pro-Clean dwell on the floor for around ten to fifteen minutes before working it in. The soiled cleaning solution was removed using a wet vacuum and then the whole floor washed down with water and stubborn areas re-treated until I was satisfied that the flagstone and grout was as clean as I could get it.

Sealing Yorkshire Stone

The floor was left to dry overnight and I returned the nexst day to seal the floor first checking it for dampness using a Damp Meter. The flagstones were dry so I then proceeded to seal the floor using four coats of Tile Doctor Seal and Go which adds a nice subtle sheen to natural stone, it also a water based sealer so there’s no smell.

Yorkshire Stone Hebden Bridge After Cleaning
The look of the Yorkshire flagstones was restored and the owner of the house left the following comment on the Tile Doctor feedback system.

Very professional service. Very happy with the results, Ms. E. Parkin

Cleaning Yorkshire Flagstone Tiled Kitchen Floor in Hebden Bridge

Yorkshire Flagstones Cleaned and Sealed in Hebden Bridge Read More »

Scroll to Top